Posts

Pokémon Unown "L" Decorative Figure Quilling Technique [Eng-Esp]

11 comments·0 reblogs
dayadam
77
0 views
·
6 min read


1000374112.jpg

Sourse Image cover generated by Gemini//Fuente Imagen de portada generada por Gemini



Hello to all my Hive friends... 🐱

My followers may have noticed that a few months ago I started a collection of Pokémon Unown. I mentioned that each one represents a letter of the alphabet and some symbols, and that they’re inspired by ancient symbols and the idea that language has power.

Here I am, eager to finish this collectible alphabet. There are still quite a few left, but I'm making progress little by little. Today, I'm sharing a new figure from this impressive alphabet: "The Unown Pokémon corresponding to the letter L", in the form of a decorative quilling figure.

I’m sharing this image so you can get an idea of all the different Unown Pokémon that exist, and so you can follow along as I create them and see how similar they are:



file_00000000d6b4720e874ef273956a6999.png

Image Generated by ChatGPT



If you'd like to see the previous Pokémon, here they are:

Pokémon Unown "A" // Pokémon Unown "B" // Pokémon Unown "C" // Pokémon Unown "D" // Pokémon Unown "E" // Pokémon Unown "F" // Pokémon Unown "G" // Pokémon Unown "H" // Pokémon Unown "I" // Pokémon Unown "J" // Pokémon Unown "K"



Hoping you like it, I leave you my creative process:

Let's get started:😃


![S.png](https://files.peakd.com/file/peakd-hive/dayadam/Eo1xq5mBnfyu766mjzRfzkkxQSiU3xbRk277sqvok1PSSskBeGZ15YzyQw52yZAx3w8.png)
Hola a toda mi gente de Hive... 🐱

Mis seguidores han podido observar, que hace unos meses comencé una colección de Pokémon Unown, les mencione que cada uno ellos demarcan una letra del alfabeto y algunos símbolos, como tambien que están inspirados en signos antiguos y en la idea que el lenguaje tiene poder.

Por acá estoy con mi entusiasmo de terminar este alfabeto coleccionable, aún faltan bastantes pero pasito a pasito voy avanzando, para hoy les dejo una nueva figura de este impresionante alfabeto "El Pokémon Unown que corresponde a la letra L", en forma de una figura decorativa en la técnica de quilling.

Les dejo está imagen para que se hagan una idea de todos los distintos Pokémon Unown existentes y así le podrán hacer seguimiento al que voy elaborando y que tan semejante es:



file_00000000d6b4720e874ef273956a6999.png

Imagen Generada por Chatgpt



Si desean ver los pokemon anteriores por acá se los dejo:

Pokémon Unown "A" // Pokémon Unown "B" // Pokémon Unown "C" // Pokémon Unown "D" // Pokémon Unown "E" // Pokémon Unown "F" // Pokémon Unown "G" // Pokémon Unown "H" // Pokémon Unown "I" // Pokémon Unown "J" // Pokémon Unown "K"



Esperando que sea de su agrado, les dejo mi proceso creativo:

Comencemos:😃



1000374079.jpg
1000374080.jpg
1000374081.jpg

2b4fc3fed82d44a782a5e5e63e0a8a32.gif

|



39.png



• Cintas para quilling.
• Aguja para quilling.
• Cartulinas.
• Tapa plástica redonda.
• Guillotina de cortar papel.
• Pega blanca extra fuerte (de carpintería).
• Pincel.
• Tijera.

  • Ribbons for quilling.

  • Needle for quilling.

  • Cardboards.

  • Round plastic lid.

  • Paper cutting guillotine.

  • Extra strong white glue (carpentry glue).

  • Brush.

  • Scissors.



40.png



• As in all my previous posts, I started by sketching the Pokémon Unown “L” on a blank sheet of paper with a pencil—the one I’m going to draw this time. I drew it at actual size so I could use it as a guide, then cut it out with scissors.

• Then I continued by creating the base shape—that is, the body of the figure. All Unown Pokémon share this same base, which is adapted into different shapes and styles. Here’s the link to the first one I made so you can see the step-by-step process; I don’t see the point in repeating it in every post: Pokémon Unown “A”.

• Next, take a 3 mm wide black ribbon. I made 4 folds in it, applying extra-strong white glue between each fold. I made these folds to create a fairly thick and sturdy piece, then let it dry thoroughly.

• Once the piece was completely dry, I cut it to the right size and used scissors to round off the tip.



41.png



• Comencé como no en todos los post anteriores realizando en una hoja de papel blanca un boceto con un lapiz, del Pokemón Unown letra L que voy a elaborar en esta oportunidad, lo realizó en tamaño original para poder guiarme con el, recorto el mismo con una tijera.

• Luego continue realizando la figura base es decir el cuerpo de la figura, todos los Pokémon Unown tiene esta misma base para seguir con formas y estilos diferentes. Les dejo el link del primero que hice para que vean el paso a paso, no le veo sentido repetirlo en todos los post, Pokémon Unown "A".

• Tomamos a continuación una cinta negra de 3 mm de ancho, con ella hice 4 dobleces aplicando pega blanca extra fuerte entre cada uno de los dobleces. Realicé estos dobleces para hacer una pieza bastante gruesa y resistente, dejé secar muy bien.

• Al secar bien la pieza, la recorte del tamaño adecuado y con una tijera le hice una forma redondeada en la punta.



1000374072.jpg1000374073.jpg
1000374074.jpg1000374075.jpg


• Tomé un trozo de cartulina negra gruesa y a esta también le hice varios dobleces aplicando pega blanca extra fuerte entre cada uno de esos dobleces, dejé secar muy bien.

• Luego tomé mi boceto y recorte como pueden ver en la imagen la parte de abajo del Pokémon.

• Teniendo ya todas las piezas listas con ayuda del boceto procedí a ensamblarlas y pegarlas, aplicando pega.

• Para finalizar plastificar y proteger mi pieza dándole también un poco un poco de brillo, apliqué varias capas de pega blanca extra fuerte dejándose secar entre una capa y otra.

De esta manera finalice este Pokémon Unown que corresponde a la letra "L" del alfabeto, en forma de una figura decorativa en la técnica de quilling.


S.png


• Tomé un trozo de cartulina negra gruesa y a esta también le hice varios dobleces aplicando pega blanca extra fuerte entre cada uno de esos dobleces, dejé secar muy bien.

• Luego tomé mi boceto y recorte como pueden ver en la imagen la parte de abajo del Pokémon.

• Teniendo ya todas las piezas listas con ayuda del boceto procedí a ensamblarlas y pegarlas, aplicando pega.

• Para finalizar plastificar y proteger mi pieza dándole también un poco un poco de brillo, apliqué varias capas de pega blanca extra fuerte dejándose secar entre una capa y otra.

De esta manera finalice este Pokémon Unown que corresponde a la letra "L" del alfabeto, en forma de una figura decorativa en la técnica de quilling.



1000374076.jpg1000374077.jpg1000374078.jpg


42.png



1000374079.jpg
1000374080.jpg
1000374081.jpg
1000374082.jpg1000374083.jpg


What did you think, did you like it?


I hope you did, I hope you liked my explanation, procedure and photos, I made them with love for you.

"Let out that muse that inspires you, and let your imagination fly".


Thank you all, see you next time ✨.

S.png


¿Que les pareció, les gustó?


Espero que sí, que les haya gustado mi explicación, procedimiento y fotos, los hice con mucho cariño por y para ustedes.

"Deja salir esa musa que te inspira, y deja volar tu imaginación".


Gracias a todos, nos vemos en la próxima✨

hidiy.gif


Cover image generated by Geminis AI

All photos used in this post are of my authorship and have been taken on my personal cell phone a Infinity Hot 40pro, edited in InShot and Canva

Banner and separator made by me in Canva

Translated with the help of DeepL


S.png


Imagen de portada generada por Geminis IA

Todas las fotos usadas en este post son de mi autoría y han sido sacadas en mi celular personal un Infinity Hot 40pro, editadas en InShot y Canva

Banner y separador hecho por mí en Canva

Traducido con la ayuda de DeepL