Posts

Llavero Pou de limpiapipas.

18 comments·0 reblogs
marile21
76
·
0 views
·
min-read

Saludos queridos amigos de Diyhub, sean bienvenidos a mi espacio creativo, espero se encuentren bien y que pasan un buena semana, estuve recordando hace días un juego que tenía en mi teléfono cuando era adolescente se trata de Pou, así que decidí recrearlo en limpiapipas.

Greetings dear friends of Diyhub, welcome to my creative space, I hope you are well and having a good week. I was remembering a few days ago a game I had on my phone when I was a teenager, it's called Pou, so I decided to recreate it with pipe cleaners.

1001745106.jpg

Recuerdo que Pou cambiaba de estilo con gorros, pelucas, lentes, etc, me gustaba mucho y era divertido para aquel entonces, en esta oportunidad les traigo mi versión en limpiapipas con un gorrito de color negro, recordé mi infancia realizando esta figura.

I remember Pou changing his style with hats, wigs, glasses, etc. I liked it a lot and it was fun back then. This time I bring you my version in pipe cleaners with a little black hat. Making this figure reminded me of my childhood.

ezgif-45b16dc7658aed03.gif

Espero puedas realizarlo y personalizarlo con tu estilo favorito, a continuación les muestro los materiales y el paso a paso.

I hope you can make it and personalize it with your favorite style; below I show you the materials and the step-by-step instructions.

1000100308.png

MaterialesMaterials
Limpiapipas marrón, negro, blancoBrown, black, white pipe cleaners
Tijera, silicónScissors, silicone
Servilleta, adhesivoNapkin, adhesive
Encendedorlighter
Pintura blancaWhite paint

1001729907.jpg

1000100308.png

Paso a paso / Step by step

El primer paso que vamos a realizar será tomar la servilleta y formar una especie de cono, en la parte superior debe quedar más delgado y en la parte inferior más gordito. También puedes utilizar una esfera de anime #3 en la parte inferior.

The first step is to take the napkin and shape it into a cone, thinner at the top and thicker at the bottom. You can also use a #3 Styrofoam ball at the bottom.

1001729912.jpg1001729931.jpg

Voy a utilizar limpiapipas marrón claro para cubrir toda la figura, no es necesario enrollar el limpiapipas así en su forma original también nos quedará bien, vamos cubriendo poco a poco hasta que tome forma.

I'm going to use light brown pipe cleaners to cover the whole figure; it's not necessary to coil the pipe cleaner, so it will look good in its original shape too. We'll cover it little by little until it takes shape.

1001729932.jpg1001729941.jpg1001729942.jpg

Verás que cuando termines de cubrir por completo tomara forma de huevito, ahora procedemos a realizar los ojos, al principio los había hecho pequeños pero no me gustó como se veía así que los hice un poco más grandes y en el centro un círculo pequeño de limpiapipas negro.

You'll see that when you finish covering it completely it will take the shape of a little egg. Now we proceed to make the eyes. At first I made them small but I didn't like how they looked so I made them a little bigger and in the center a small circle of black pipe cleaner.

1001729949.jpg1001729950.jpg1001729970.jpg

1000100308.png

Con un alambre de limpiapipas colocamos la boca de un lado de forma sonriente, con el limpiapipas negro realicé la gorrita que lleva puesta, solo trata de hacer un círculo pequeño e ir dando vueltas y pegar, por último colocamos el aro de llavero y listo.

Using a pipe cleaner wire, we attached the mouth to one side in a smiling shape. With the black pipe cleaner, I made the little hat it's wearing; just make a small circle, twist it around, and glue it on. Finally, we attached the keyring and that's it.

1001729991.jpg1001730031.jpg1001730032.jpg

De esta forma terminé al Pou, espero les haya gustado el resultado, muchas gracias por el apoyo y por visitar mi publicación nos vemos en una próxima oportunidad con más ideas creativas.

This is how I finished the Pou. I hope you liked the result. Thank you so much for your support and for visiting my post. See you next time with more creative ideas.

1001730033.jpg1001730034.jpg

Resultado final:

Bottom line:

1001745107.jpg

1001745111.jpg

1000100308.png

1000095868.png

Contenido original. - original content.
Los separadores y banner fueron realizados en Canva. - The dividers and banner were made in Canva.
Fotografías tomadas con mi Samsung A55. - Photographs taken with my Samsung A55.
Gif creado desde Giphy / Gif created from Giphy
Traducción de: Google traductor - Translation of: Google translator.

1000100308.png

Posted Using INLEO