Today, we will be drafting a simple baby gown, comprising of two materials, comprising of a lacra material and a dutchees material.
Measurement needed for drafting of these gown
A) Fabrics
B) tailors chalk
C) measuring tape
D) scissors.
PROCEDURES
First, to start drafting these gown, we will need to iron the material , thats if is not straight , after ironing, i hai had to fold the material into four before taking the measurements.
Measurement needed for drafting these gowm
The baby that will be wearing these gown is about two years, and so her burst measurement is 23, her tommy is 23, her shoulder measurement is 12, her sleeve is 5 and her round sleeve is 5, her gown length is 27.
Drafting
Inorder to get an accurate measurement while drafting, i divided the burst, tommy bodice by four, while the shoulder is divided by two.
After drafting i ha to cut it out,then cut the down part of the gown , is a gown with little gathers, so i hai had to fold the material i to four, then measure out the waist and the length, remember, i used 10 inches as the half length of these gown, so i minus 10 from the actual gown length and cut it out.
So far, i will e stopping here, during my next post, i will tell you how i sew it.
Posted Using InLeo Alpha
